ЪДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДї
           іЪДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДїі
           ііHow to use a fax modem with frontdoor 2.20іі
           іАДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДЩі
           АДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДЩ

This document was prepared by:

Mark Kerr @ 2:443/59, 2:443/60(fax) fidonet


This is a functional setup for fd 2.20 and a supra v32bis faxmodem with 1.71
roms.


Fossil is BNU 1.70 locked at 57600   copyright David Nugent
BGFAX is 1.00beta5                   copyright B. J. Guillot
XRobot is 3.01 for dos               copyright Joaquim Homrighausen
Zfax is 2.23                         copyright Zyxel Corporation

This setup will receive faxes using bgfax as a rearend, xrobot to create
the netmail and zfax to view the fax.


Any ideas for improvements, queries, modifications should be forwarded to
the author via netmail for consideration..

   ЪДДДДДДДДДї
   іIMPORTANTі
   АДДДДДДДДДЩ


This setup works for me, however it is strongly recommended that you read
fully the documentation for all the products involved!!!!!!!!

   ЪДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДї
   іSETTING UP - the interesting bit..і
   АДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДЩ

I have set the received fax dir as d:\zfax\rcv
bgfax is on the c: drive which is a ramdisk

   ЪДДДДДДДї
   іFDSETUPі
   АДДДДДДДЩ

 MAILER/FAX

RcvdFiles D:\ZFAX\RCV\
Recipient Mark Kerr
Print     No   (or Yes :-)
Printer   d:\zfax\zfax.com 2 =F

 MAILER/ERRORLEVELS

Fax             254
Received mail   200
Create BAT.file Yes


 EDITOR/FAX

Viewer     d:\zfax\zfax.com 4 =F
Automatic  Yes
Remove     No

 MODEM/HARDWARE

Serial port                   2
Locked port                   Yes
Maximum baudrate              Fixed
Reset modem to connect speed  Yes
Lower DTR when busy           Yes
Lower DTR to terminate call   Yes
Toggle DTR before dialing     Yes
Carrier detect mask (CDMASK)  128


 MODEM/CONNECT MESSAGES

Fax         FAX


 MODEM/COMMAND STRINGS

Escape code    +++
Return on-line ~ATO|
Onhook         ATH0|
Offhook        ~ATH1|
Dial           ATDT
ГДPrefix
АДSuffix       |
Delay          5
Init-1         ATZ|
Init-2         AT+FAA=1+FCR=1|
Init-3         AT+FLID="Your Name Here....."+FDCC=1,5|
Down           ATH1|
Reset          ATz|

 MODEM/ANSWER CONTROL

Manual answer Yes
Force answer  AT+FAA=1;A|
Answer delay  5
Enable LDFRS  No

 MODEM/FAX

Internal No

  ЪДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДї
  іRELEVANT PORTIONS OF THE MAIN BATCH FILEі
  АДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДЩ

if errorlevel 254 goto FAX

:FAX

   c:\bgfax.exe /FAX d:\zfax\rcv 2 z
   if errorlevel 4 call d:\zfax\rcv\doprint
   goto START

  ЪДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДї
  іSAMPLE DOPRINT.BAT CREATED BY BGFAXі
  АДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДЩ

D:\ZFAX\RCV\EXEPRINT.BAT D:\ZFAX\RCV\FAX0004.ZFX

  ЪДДДДДДДДДДДДДДДї
  іMY EXEPRINT.BATі
  АДДДДДДДДДДДДДДДЩ

d:\fd\xrdos send /f%1 /r2:000/000 /n3 /mb+

Here I use XRobot 301 for dos to send me the notification of a fax
/F%1 uses the second part of bgfax's dofax.bat to find the file
/r   is your address
/n3  is user number 3 in my fdsetup (called "FAX")
/mb+ sets the fax attach msg attribute

  ЪДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДї
  іPOSSIBLE EXEPRINT.BAT TO ALLOW FAX FORWARDINGі
  АДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДЩ

d:\fd\xrdos send /f%1 /r2:000/000 /n3 /mb+
c:\bgfax /send %1 232 343 5566

this would announce the fax in your netmail folder, then attempt to
forward the fax to 232 343 556 using the information in your bgfax.cnf
file.

  ЪДДДДДДДДДДДДДДї
  іMY SUPRA SETUPі
  АДДДДДДДДДДДДДДЩ

AT&V
ACTIVE PROFILE:
B1 E1 L3 M1 N1 Q0 T V1 W2 X4 Y0 %C1 %E1 %G1 \N3 &C1 &D2 &K3 &Q5 &R0 &S0 &X0 &Y0
S00:000 S01:000 S02:043 S03:013 S04:010 S05:008 S06:002 S07:050 S08:002 S09:000
S10:014 S11:048 S12:050 S18:000 S23:063 S25:005 S26:001 S36:007 S37:000 S38:020
S40:071 S46:138 S48:007 S95:003 S109:062 S110:002


  ЪДДДДДДДДї
  і HISTORYі
  АДДДДДДДДЩ


Updated 09/09/93

   bgfax now supports fax transmission from the commandline (beta 5)
   adding a suitable command to your exeprint.bat should allow the
   received fax to be retransmitted/forwarded if you wish. Possible
   uses could be if you are expecting an important an important fax
   and will not be at your machine but at another location with a
   suitable fax. The problem is all faxes received until your return
   would be forwarded, unless you modified or changed the batchfile
   remotely.
   This requires that you edit the bgfax.cnf file to suit your modem
   and set an environment variable to point at its location. Full
   details of this can be found in the bgfax documentation.

Updated 25/8/93

   bgfax now makes a doprint.bat which calls exeprint.bat
   with beta 02      dofax.bat               exefax.bat


Known Bugs

   xrobot doesn't recognize the $task$ in the fd logname.